T+A HCP XLR4 4-Pin XLR Headphonecable for Solitaire P

HCP XLR-4

T + A offers three different plugs in its headphone cable program. One of them is equipped with a 4-pin XLR connector. Due to its symmetrical structure, the left and right channels of the XLR connector (manufactured by Neutrik) are separate.
The separate structure enables the best possible sound quality, since it prevents the channels from interfering with each other, as can occur with jack plugs. All contacts are hard gold-plated and free of ferromagnetic materials. The HCP XLR headphone cable is available in lengths of 3m and 5m.

technology

Headphone cables differ fundamentally from speaker cables in terms of their requirements. The latter are designed for high currents and voltages, while headphones, in contrast, work with lower currents and voltages. In order to meet these requirements, a very high material quality and complex construction are necessary.

T + A headphone cables are made from pure OFC (Oxygen Free Copper) as a base, the conductors are coated with pure silver. The impedance, capacitance and inductance are low, but above all, above average, linear and constant over the entire frequency range. The left and right channels are separate and each have two signal cables (symmetrical structure).

In order to avoid harmful electrostatic influences and charges, both are additionally covered with a silver-plated shielding braid. The insulation is made of high quality dielectric materials. Professional two-pin connectors (male and female) are used on the headphone side.

Technical specifications

• HCP XLR-4: Headphone connection cable with 4-pin XLR plug
• Measured values: with 3 m cable length
• Inductance: 1.7 µH
• Capacity: 440 pF
• Impedance: 630 mOhm