T+A HCSE XLR-4 Headphone Cable for Solitaire P-SE

T+A headphone cable for Solitaire P-SE

HCSE XLR-4

T+A also offers headphone cables with different plugs for the Solitaire P-SE. One of them is equipped with a 4-pin XLR connector. Due to its symmetrical construction, the left and right channels of the XLR connector (manufactured by Neutrik) are completely separate.

The separate structure enables the best possible sound quality, since the interference between the channels is prevented, as can occur with jack plugs. All contacts are hard gold plated and free of ferromagnetic materials. The HCSE XLR headphone cable is available in lengths of 3m and 5m.

technology

Headphone cables differ fundamentally in their requirements from speaker cables. The latter are designed for high currents and voltages, while headphones, on the other hand, work with lower currents and voltages. In order to meet these requirements, very high material quality and complex construction are necessary.

T+A headphone cables are made from pure OFC (Oxygen Free Copper) as a base, the conductors are coated with pure silver. The impedance, capacitance and inductance are low, but above all linear and constant over the entire frequency range. The left and right channels are separate and each have two signal cables (symmetrical structure).

In order to avoid harmful electrostatic influences and charges, both are additionally covered with a silver-plated braided shield. The insulation consists of high-quality dielectric materials. On the headphone side, professional two-pin connectors (male and female) are used

Technical specifications

• HCSE XLR-4:
  Headphone connection cable with 4-pin XLR connector
• Readings:
  with a cable length of 3 m
• Inductance:
  1.7µH
• Capacity:
  440pF
• Impedance:
  630mOhm