T+A PA 2500 R V 1.3 Integrated Amplifier

Productnumber

273488 Twice as high, a higher output power and even more connection options - the PA 2500 R outperforms the PA 2000 R in many disciplines, without being even remotely inferior to its smaller counterpart in terms of sound quality. This cannot be taken for granted, as very powerful amplifiers often lose their fine dynamics and clarity. This is not the case with our PA 2500 R integrated amplifier. It has the identical basic circuit and even identical circuit board layouts as the PA 2000 R. However, it has a heat sink that is twice as large and two of the high-performance power supplies, so that more than 260 watts of continuous power per channel are available on 4-ohm speakers. Even loudspeakers that are extremely phase and impedance critical can easily be controlled. The PA 2500 is even more powerful with the same dynamics and sound culture.
The PA 2500 R has three professional balanced inputs (XLR), one of which can be configured as a surround pass through, four high-quality cinch inputs (RCA), a pre-amplifier output in symmetrical (XLR) and asymmetrical design (RCA) and two pairs Loudspeaker outputs with heavy-duty connection terminals made of non-magnetic pure brass and rhodium-plated contact surfaces. The connection socket for headphones is on the front.

Prepress
Frequency response + 0 / -3dB	0.5 Hz-300 kHz
External / noise voltage ratios	105 / 109dB
Harmonic distortion / intermodulation	<0.001% / <0.001%
Channel separation	> 90dB
Loudness	Can be switched off, adjustable to loudspeaker efficiency
Tone control	Can be switched off, channel-separated Bass -6. + 8dB Heights -6. + 8dB
Input sensitivity nominal
High level (RCA)	4 × 250mV. 4 Veff / 20 kOhm
Balanced (XLR)	3 × 500mV. 8 Veff / 5 kOhm
Phono-MM (optional *)	1-5mV, 16 capacities
Phono-MC (optional *)	60-1000µV, 16 impedances
* Phonomodul replaces a high level input
Outputs
headphone	50 ohms
PRE out RCA	Nom 1Veff, Max 9.5Veff, 75Ohm
PRE out XLR	Nom 1.45Veff, Max 19.6Veff, 75Ohm
Power amplifier
Nominal power per channel	at 8 ohms 140 watts 280 watts at 4 ohms at 2 ohms 560 watts
Frequency response + 0 / -3dB	1Hz-150kHz
Slew rate	60 V / µs
Damping factor	> 65
Distortion factor	<0.02%
Sieving	120000µF
More information
Control interface	R2 link
remote control	FM2000
Mains connection	Automatic mains voltage switching, 100-120V, 200-240V, 50-60Hz Max. 2000 watts
Standby	<0.5W
Additional equipment	Trigger input + 5V.20V via adapter plug for remote switch-on Input 3 (symmetrical) or 5 (asymmetrical) configurable as Surround Pass Through
Dimensions (H × W × D)	16.5 × 46 × 405cm
Weight	14.5kg
Executions	Silver anodized aluminum (43), black anodized aluminum (42), brushed
Technical changes reserved.