Rotel Spring Set RA 6000 & DT 6000

Greetings from Michi: The new Diamond series is strongly based on the high-end cars, but traditionally sticks to the typical Rotel design. The devices from the Diamond series are perfectly matched and therefore an absolute dream team for the highest quality music reproduction.

RA 6000 - The amplifier

The RA-6000 Diamond Series Integrated Amplifier is the result of Rotel's 60 years of experience. The RA-6000 supports a wide range of modern and traditional analogue and digital sources. Its class AB power amp delivers 350 watts into 4 ohms with exceptional detail and precise lows.

Integrated DAC and phono input

The digital inputs support audio streams up to 24-bit/192 kHz. The asynchronous PC USB input supports audio up to 32-bit/384kHz, decodes and renders MQA and is Roon certified. For vinyl fans there is a phono input for moving magnet systems.

The device can be operated intuitively via the front panel controls, the IR remote control with backlight and the two-line display.

Ethernet, RS232, 12V trigger and a remote input facilitate integration into control systems.

The RA-6000 is available in black and silver.

Technical details

INTERMODULATION DISTORTION

(60Hz:7kHz, 4:1)

<0.03%

DAMPING FACTOR

600

INPUT SENSITIVITY

High level inputs (RCA): 340mV

High level inputs (XLR): 540mV

Digital inputs: 0 dBfs

Phono input (MM): 5.2mV

INPUT IMPEDANCE

High level inputs (RCA): 5.6kO

High level inputs (XLR): 100kO

Digital inputs: 75O

Phono input (MM): 47kO

PASS

High level inputs (RCA): 3.5V

High level inputs (XLR): 4.5V

Phono input: 52mV

OUTPUT LEVEL

1.9V

OUTPUT IMPEDANCE

100O

DIGITAL SIGNALS (COAXIAL/OPTICAL)

LPCM (up to 24-bit/192kHz)

PC USB

USB Audio Class 2.0 (up to 32-bit/384kHz)*

*Driver installation required

MQA and MQA Studio (up to 24-bit/384kHz )

Roon Tested

DIMENSIONS (W × H × D)

431×144×425mm
17' × 5.7' × 16'

PANEL HEIGHT

3U / 132.6mm (5.25')

POWER SUPPLY

230V, 50Hz

POWER CONSUMPTION

500W

STANDBY POWER CONSUMPTION

<0.5W

NET WEIGHT

18.81kg (41.47lbs.)

Btu

1239 BTU/hr

MAXIMUM POWER OUTPUT

350W/Ch (4O)

CONTINUOUS OUTPUT

200W/Ch (8O)

OVERALL THD

<0.0075%

FREQUENCY RESPONSE
High level inputs:

10Hz - 100kHz, ±0.5dB

digital inputs:

10Hz - 90kHz, ±2dB

Phono input:

20Hz - 20kHz, ±0.5dB

VOLTAGE/NOISE RATIO (IHF 'A')
High level inputs: 103dB

Digital inputs: 102dB

Phono input: 80dB

DT 6000 - The digital source

The Rotel DT-6000 D/A converter with CD drive is the result of six decades of experience: Rotel turns 60!

PC USB, optical and coaxial inputs and the built-in CD drive with slide-out tray offer maximum flexibility for your favorite sources and ensure audio with exceptional detail and playback that you can literally immerse yourself in.

The Rotel DT-6000 D/A converter offers the highest performance, musicality and values, in the tradition of one of the most renowned Japanese manufacturers.

The digital technology

The 8-channel ESS Saber ES9028PRO D/A converter uses 4 channels for each stereo output, delivering unmatched detail with an extremely low noise floor for a finely staged stage.

PC USB input supports up to 32-bit/384kHz, including MQA (24-bit/384kHz) and DSD (4X). Optical and coaxial digital inputs for streams up to 24-bit/192kHz are also provided.

power supply

The critical circuits are individually powered from a Rotel manufactured toroidal transformer. Special isolation techniques ensure extremely low noise and distortion.

Classic CD player with intuitive operation

The CD drive with extendable tray and its award-winning technology developed over 30 years gets all the nuances and details out of large and small CD collections.

The device can be operated intuitively via the front panel controls, the IR remote control with backlight and the two-line display.

With RS232, 12V triggers and a remote input, it integrates seamlessly into control systems.

The DT-6000 is available in black and silver.

DIMENSIONS (W × H × D)

431×104×320mm
17' × 4' × 12.6'

PANEL HEIGHT

2U / 88.1mm (3.5')

POWER SUPPLY

230V, 50Hz

POWER CONSUMPTION

25W

STANDBY POWER CONSUMPTION

<0.5W

NET WEIGHT

8.11kg (17.88lbs.)

OVERALL THD

Coaxial/Optical inputs: <0.0007%

CD/PC-USB inputs: < 0.0012%

FREQUENCY RESPONSE
20Hz - 20kHz, +0, -0.15dB

10Hz - 70kHz, +0, -3dB

VOLTAGE/NOISE RATIO (IHF 'A')
>115dB

D/A CONVERTER

ESS 32-bit/768kHz DAC

CHANNEL BALANCE

±0.5dB

CHANNEL SEPARATION

>115dB @ 10kHz