McIntosh MXA80 Audio system black
McIntosh MXA80
Integrated audio system
The family of audiophile compact systems is being expanded and is growing with the powerful-sounding MXA80. For customers looking for the perfect musical experience in an all-in-one solution. The system delivers two times 50 watts of power to two compact speakers specially developed by McIntosh.
Excellent solid workmanship and a high-gloss black surface characterize the stable speaker construction. The combination of selected drivers and the aluminum housing leads to a full and impressively precise sound. Additionally, you will be able to connect your powered subwoofer to the MXA80.
Technical specifications
POWER OUTPUT PER CHANNEL: 50 watts
SPEAKER IMPEDANCE: 8 ohms
RATED POWER RANGE: 20Hz to 20kHz
OVERALL HARMONIC DISTORTION: 0.005%
INTERMODULATION DISTORTION:
0.005% maximum when instantaneous peak power is 100 watts or less per channel and both channels are operated for any combination of frequencies from 20Hz to 20kHz
DYNAMIC HEADROOM: 1.5dB
FREQUENCY RESPONSE +0,-0.5DB: 20Hz to 20kHz
FREQUENCY RESPONSE, +0, -3DB:
10Hz to 100kHz
SENSITIVITY (UNBALANCED): 300mV
SENSITIVITY (BALANCED): 600mV
MAXIMUM INPUT SIGNAL (UNBALANCED): 8V
MAXIMUM INPUT SIGNAL (BALANCED): 16V
SIGNAL TO NOISE RATIO: 105dB
INPUT IMPEDANCE (BALANCED/UNBALANCED):
25K/25K
DAMPING FACTOR: >150
PREAMP OUTPUT: 3V (Maximum 8V)
PREAMP OUTPUT IMPEDANCE: 500 ohms
VOLTAGE GAIN: 36.5dB
PERFORMANCE GUARANTEE:
<2% THD with up to 16dB clipping at 1kHz
SPEAKER SPECIFICATIONS
SYSTEM DRIVERS:
A 4 inch woofer/midrange driver
A 3/4 inch dome tweeter
IMPEDANCE: 8 ohms nominal
FREQUENCY RESPONSE: 60Hz - 45kHz
SENSITIVITY: 80dB (2.83V/1m equivalent)
CROSSOVER FREQUENCY: 2,000 Hz
POWERFUL OPERATION: 75 watts
CASE FINISH: Black high gloss
GRILLE FINISH: Black knit fabric
DIGITAL AUDIO SPECIFICATIONS
DIGITAL COAXIAL INPUT SAMPLING RATES:
16bit, 24bit - 32kHz to 192kHz
OPTICAL DIGITAL INPUT SAMPLING RATE:
16bit, 24bit - 32kHz to 192kHz
DIGITAL MCT (DIN) INPUT SAMPLING RATE:
16bit, 24bit - 32kHz to 192kHz
USB DIGITAL INPUT SAMPLING RATE:
16bit, 24bit, 32bit - 32kHz to 384kHz
HEADPHONE OUTPUT SPECIFICATIONS
HEADPHONE OUTPUT:
High range: 1W
Normal selection: 250mW
HEADPHONE OUTPUT IMPEDANCE:
8-40 ohms
40-150 ohms
150-600 ohms
CONNECTIVITY
HEADPHONE OUT: 1 (1/4')
HIGH LEVEL INPUTS UNBALANCED: 1 Stereo
HIGH LEVEL INPUTS BALANCED: 1 Stereo
DIGITAL COAXIAL INPUT: 1
DIGITAL OPTICAL INPUT: 1
DIGITAL MCT (DIN) INPUT: 1
USB DIGITAL INPUT: 1
PREAMP OUTPUT: 1 stereo
STEERING
SOUND CONTROLS:
5-position bass boost control: 0 to +12.5 dB (in 2.5 dB steps) at 40 Hz
POWER CONTROL INPUT: Yes
POWER CONTROL OUTPUT: Yes
GENERAL SPECIFICATIONS
EXIT METER: Yes
VACUUM TUBE OR SOLID STATE
solid
POWER REQUIREMENTS: 120V 50/60Hz, 1.5A
STANDBY POWER REQUIREMENT: <0.25 watts
OUTPUT AUTOTRANSFORMER: Yes for headphones
WEIGHTS AND DIMENSIONS
DIMENSIONS (WXHXD):
59.1cm (23-1/4') x 27.62cm (10-7/8') x 48.3cm (19')
WEIGHT: 50 pounds (22.6 kg)
| Condition: | new item |
|---|---|
| Device depth mm: | 483 |
| Device height mm: | 276.2 |
| Device width mm: | 591 |
| Product type: | All-in-one device |
Manufacturer
McIntosh Labs
McIntosh Labatory Inc.
2 Chambers Street
13903 Binghamton
New York
USA
rhullekes@finesounds.nl
EU Representative
Audio Components Vertriebs GmbH
Leverkusenstraße
Hamburg 22761
Germany
info@audio-components.de
Safety Information
Product-specific safety instructions can be found in the operating manual.
