Pro-Ject X1 B Turntable with Pick it PRO B
€1,099.00
per Piece incl. VAT / incl. Shipping
Available in 7 days, delivery time 1-3 days
GermanyWe ship your goods quickly and safely with DHL. After shipping you will receive a tracking number for package tracking.
Audiophile upmarket turntable
- True Balanced-ready!
- Symmetrical MM cartridge Pick it PRO Balanced
- Satin acrylic plate
- Carbon/aluminum tonearm 8.6 inch
- 33/45 RPM (electronic)
- 78 rpm (manual)
- Dust cover included
True high-end features with a world first
The X1 B offers all the high-end features of a modern turntable at an attractive price – and a true world first: the very first symmetrical MM cartridge! This allows you to enjoy the advantages of the True Balanced Connection at a previously unattainable price.
The chassis
Dense wood fibers provide sufficient mass, resonance damping, and stability for the best possible mechanical tracking of every record. The satin-finished acrylic platter not only looks good but also offers the LP a stable base for precise tracking and excellent, constant speed. This is ensured by the electronic motor control with
The pickup
A Pro-Ject Pick it PRO Balanced moving magnet (MM) cartridge is factory-installed. This cartridge is a true sensation: it's the first MM cartridge ever to offer balanced signal output. This allows for a "True Balanced Connection" signal transmission with the Pick it PRO Balanced. Standard MM cartridges cannot be used in a balanced configuration, as this would result in a difference between the left and right channels.
True Balanced
The internal wiring, consistently separated according to signal and shielding, and the connection terminal with mini-XLR socket enable a fully balanced connection according to the Pro-Ject True Balanced concept. With the X1 B, an MC cartridge is no longer necessary! Only an optional balanced cable such as the Connect it Phono E or Connect it Phono S is required for truly balanced operation.
The X1 B is available in three different color options: the luxurious black or white eight-layer high-gloss paint finish and a premium walnut veneer.
Note: An optional balanced cable is required for balanced operation.
drive
- Chassis surface in piano black and white. Veneered and satin-waxed in walnut.
- Electronic speed selection between 33 and 45 rpm, manual setting option from 78 rpm
- The chassis, made of compressed wood fibers, stands on aluminum feet mechanically dampened with TPE*.
- Turntable made of satin acrylic
- The turntable bearing consists of a sintered bronze bushing in which a high-precision stainless steel axle runs on a Teflon bearing base.
- Integrated motor control (sine wave generator)
- External power supply for protection against mechanical and electromagnetic interference
- A transparent, hinged dust cover made of Plexiglas is included.
tonearm
- Straight 8.6-inch tonearm
- Supplied with pre-mounted and adjusted Pro-Ject Pick it PRO Balanced MM cartridge
- The headshell and tonearm tube are made from a single piece of carbon fiber/aluminum composite material.
- The tonearm tube can be rotated after loosening a screw. This allows for horizontal (azimuth) adjustment of the cartridge despite the fixed headshell.
- The tonearm base offers an adjustment option for the vertical tracking angle (VTA).
- Four hardened stainless steel tips, mounted in sapphires, form the inverted tonearm bearings.
- Tonearm cable Pro-Ject Connect it Phono RCA-E (length approx. 123cm) included
Connection
- MM phono input on the amplifier or on the external phono preamplifier
- An RCA/phono jack terminal allows the connection of individual phono cables.
- A 5-pin mini-XLR connector enables a true balanced setup.
Technical data
- Dimensions W x H x D: 415 x 125 x 335mm
- Weight: 7kg
| Abschlussimpedanz in Ohm: | 47000 |
|---|---|
| Cartridge type: | MM |
| Color: | eucalyptus |
| Condition: | new goods |
| Device depth mm: | 335 |
| Device height mm: | 125 |
| Device width mm: | 415 |
| Drive: | belt drive |
| Dust cover included: | Yes |
| Features / special features: | The first MM cartridge ever to enable symmetrical signal output |
| Integrated preamplifier: | no |
| Outputs: | Analog XLR |
| Output voltage in mV: | 4 |
| Playback speeds: | 33, 45, 78 |
| Product type: | turntable |
| RCA jacks: | Yes |
| Series: | X |
| Tonearm type: | Radial tonearm |
| Tracking force in g: | 2.0 |
Manufacturer
Audio Tuning Vertriebs GmbH
Wirtschaftspark A5 Mistelbach/Wilfersdorf
Analogweg 1
2130 Mistelbach AUSTRIA
info@project-audio.com
Safety Information
Product-specific safety instructions can be found in the operating manual.
