T+A HCP 6.3 Headphonecable for Solitaire P

HCP 6.3

T + A offers three different plugs in its headphone cable program. One of them is equipped with the 6.35mm jack plug, which is currently the most widely used connector. However, jack plugs are not constructed symmetrically; the ground of their left and right channels is connected. All contacts are hard gold-plated and free of ferromagnetic materials. The HCP 6.3 headphone cable is available in lengths of 3m and 5m.

technology

Headphone cables differ fundamentally from speaker cables in terms of their requirements. The latter are designed for high currents and voltages, while headphones, in contrast, work with lower currents and voltages. In order to meet these requirements, a very high material quality and complex construction are necessary.

T + A headphone cables are made from pure OFC (Oxygen Free Copper) as a base, the conductors are coated with pure silver. The impedance, capacitance and inductance are low, but above all, above average, linear and constant over the entire frequency range. The left and right channels are separate and each have two signal cables (symmetrical structure).

In order to avoid harmful electrostatic influences and charges, both are additionally covered with a silver-plated shielding braid. The insulation is made of high quality dielectric materials. Professional two-pin connectors (male and female) are used on the headphone side.

Technical specifications

• HCP 6.3: Headphone connection cable with 6.3 mm jack plug
• Measured values: with 3 m cable length
• Inductance: 1.7 µH
• Capacity: 440 pF
• Impedance: 630 mOhm