T+A HCSE 6.3 Headphone Cable for Solitaire P-SE

T+A headphone cable for Solitaire P-SE

HCSE 6.3

T+A also offers headphone cables with different plugs for the Solitaire P-SE. One of them is equipped with the 6.35 mm jack plug, currently the most commonly used connector. However, jack plugs are not built symmetrically; the grounds of the left and right channels are connected. All contacts are hard gold plated and made of high purity brass. The HCSE 6.3 headphone cable is available in lengths of 3m and 5m.

technology

Headphone cables differ fundamentally in their requirements from speaker cables. The latter are designed for high currents and voltages, while headphones, on the other hand, work with lower currents and voltages. In order to meet these requirements, a very high material quality and complex construction are necessary.

T+A headphone cables are made from pure OFC (oxygen free copper) as a base, the conductors are coated with pure silver. The impedance, capacitance and inductance are low, but above all linear and constant over the entire frequency range. The left and right channels are separate and each have two signal cables (symmetrical structure).

In order to avoid harmful electrostatic influences and charges, both are additionally covered with a silver-plated braided shield. The insulation consists of high-quality dielectric materials. On the headphone side, professional two-pin connectors (male and female) are used.

Technical specifications

• HCSE 6.3:
  Headphone connection cable with 6.3 mm jack plug
• Readings:
  with a cable length of 3 m
• Inductance:
  1.7µH
• Capacity:
  440pF
• Impedance:
  630mOhm