Technics SL-1210 MK7 DJ + Ortofon Concorde MK II Mix

Direct drive turntable
SL-1210MK7

Precise, stable synchronization and powerful drive torque

With direct drive, a slow-running motor is used, which drives the turntable directly on the same axis. This system offers many advantages, such as optimum synchronization, high drive torque, pleasant freedom from maintenance and outstanding reliability over the entire service life. However, older direct drive motors were characterized by the so-called cogging torque, small micro-vibrations that go back to magnetic polarity reversal processes. The SL-1210MK7 uses a new drive motor with a stator that does not require an iron core. Therefore, this motor is also free from cogging torque. The gap between the coreless stator and rotor (drive magnets) has been minimized to maximize drive torque. In this way, a torque could be realized that corresponds to that of the SL-1200MK5.

New functions for more creativity

Adjustability of starting and braking torque

The SL-1210MK7 impresses with innovative technologies for motor control. They have been used and perfected primarily in the latest generation of Blu-ray players. Thanks to a microcomputer, the controller easily withstands normal playback as well as more demanding DJ applications such as scratching. In addition, the starting torque and braking speed can be adjusted to individual preferences.

Pitch function for fine speed adjustment

The rotational speed of the SL-1210MK7 can be set to 33-1/3, 45 or 78 rpm.* The pitch adjustment range is ±8%/±16%. This enables high-precision and stable fine-tuning of the speed as well as perfect matching, e.g. B. two SL-1210MK7 units in DJ mode. *The use of 78 RPM is activated via the main on/off switch.

Reverse play function

If the speed button and the start/stop button are pressed at the same time, the platter rotates in the opposite direction*. This opens up new, creative possibilities for the DJ. *The reverse play function is activated via the main on/off switch.

*The pickup system must be designed for scratch operation.

Highly sensitive tonearm

The tonearm is statically balanced in an S-shape - typical of Technics models. The tonearm tube is made of lightweight, high-strength aluminum, while the gimbal's bearing section features a machined housing and high-precision bearing elements. This ensures excellent tracking with a minimum of unwanted stylus movement even under harsh conditions such as scratching.

Needle lighting using bright, long-life LEDs

The telescopic needle light uses a new push mechanism and a bright, long-lasting white LED. In addition, the lighting area and the exposure intensity were adjusted. Compared to the previous models, this ensures better visibility of the needle - even in very dark environments.

Detachable power and signal cable for greater flexibility

The SL-1210MK7's power and phono cables are detachable for quick swapping. The gold-plated phono connection sockets ensure the best sound quality and contact properties.

Highly stable housing and effective damping feet

The chassis of the SL-1210MK7 is very stable and extremely low in vibration. The die-cast aluminum chassis is rigidly attached to a construction of ABS (acrylonitrile butadiene styrene copolymer) plastic reinforced with fiberglass. The two-layer construction offers strength and vibration damping at the highest level and thus guarantees faithful, dynamic sound reproduction. Feet made of a spring-rubber construction ensure optimal cushioning. They also ensure stability in horizontal movement. This combination guarantees uncomplicated handling, especially when scratching, and very good interference immunity - even at very high sound levels.

Turntable specifications

Type: Direct drive manual turntable

Platter Speeds: 33 1/3, 45, rpm (switching to 78 rpm)

Starting torque: 0.18 N m / 1.8 kg?cm

Run-up time: 0.7 seconds from standstill to 33 1/3 rpm

Wow and flutter: 0.025% WRMS.

Platter: Die-cast aluminum Diameter: 332 mm Weight: Approx. 1.8 kg (including slipmat and slipsheet)

tonearm

Type: Universal, statically balanced

Effective Length: 230mm

Overhang: 15mm

Tracking Error Angle:

Within 2°32' (at the outer groove of a 30 cm (12') record)Within 0°32' (at the inner groove of a 30 cm (12') record)

Offset angle: 22°

Tonearm height adjustment range: 0 - 6 mm

Pad pressure adjustment range: 0 - 4 g (direct reading)

Cartridge Weight: Approx. 7.6g

Acceptable pickup weight range:

(without auxiliary weight)5.6 - 12.0 g14.3 - 20.7 g (including cartridge)

Pickup head spade lug: 1.2mm? 4-pin cable lug

exits

Audio output:

PHONO (phone plug) x 1 GROUND TERMINAL x 1

General

Power Supply: AC 110-240V 50Hz/60Hz

Power consumption:

8W Approx. 0.2W (standby)

Dimensions (W x H x D): 453 x 169 x 353 mm

Weight: Approx. 9.6 kg

DJ pickup Concorde MK II MIX

The Concorde MK II MIX is the DJ system for beginners

Technical data MK II MIX:

Output voltage at 1000Hz, 5cm/sec. - 6mV
Channel balance at 1kHz - 1.5dB
Channel separation at 1kHz - 20dB
Channel separation at 15kHz - 15dB
Frequency range at -3dB - 20-20,000 Hz
Tracking ability at 315 Hz at recommended tracking force - 100 µm
Compliance, dynamic lateral - 14 µm/m N
Stylus type - Spherical R 18 µm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Cartridge weight - 18.5g